米葫芦网

6509NAT示例

热度:8℃ 发布时间:2023-11-16 19:36:11

Console> (enable) show config all
begin
!
# ***** ALL (DEFAULT and NON-DEFAULT) CONFIGURATION *****
!
!
#time: Sun Oct 21 2001, 21:36:49
!
#version 6.2(2)
!
set passWord $2$FMFQ$HfZR5DUszVHIRhrz4h6V70
set enablepass $2$FMFQ$HfZR5DUszVHIRhrz4h6V70
set prompt Console>
set length 24 default
set logout 20
set config mode binary
set banner motd ^C^C
!
#test
set test diaglevel minimal
!
#errordetection
set errordetection inband disable
set errordetection memory disable
set errordetection portcounter enable
!
#system
set system baud 9600
set system modem disable
set system name
set system location
set system contact
set system countrycode
set traffic monitor 100
set system highavailability disable
set system highavailability versioning disable
set system core-dump disable
set system core-file slot0:crashinfo
set feature log-command enable
set feature supmon enable
!
#power
set power redundancy enable
!
#frame distribution method
set port channel all distribution ip both
!
#mac address redUCtion
set spantree macreduction disable
!
#default portcost mode
set spantree defaultcostmode short
!
#snmp
set snmp community read-only public
set snmp community read-write private
set snmp community read-write-all secret
set snmp rmon disable
set snmp rmonmemory 85
set snmp trap disable module
set snmp trap disable chassis
set snmp trap disable bridge
set snmp trap disable repeater
set snmp trap disable vtp
set snmp trap disable auth
set snmp trap disable ippermit
set snmp trap disable vmps
set snmp trap disable entity
set snmp trap disable config
set snmp trap disable stpx
set snmp trap disable syslog
!
#tacacs+
set tacacs attempts 3
set tacacs directedrequest disable
set tacacs timeout 5
!
#radius
set radius deadtime 0
set radius timeout 5
set radius retransmit 2
!
#kerberos
!
#authentication
set authentication login tacacs disable console
set authentication login tacacs disable telnet
set authentication login tacacs disable http
set authentication enable tacacs disable console
set authentication enable tacacs disable telnet
set authentication enable tacacs disable http
set authentication login radius disable console
set authentication login radius disable telnet
set authentication login radius disable http
set authentication enable radius disable console
set authentication enable radius disable telnet
set authentication enable radius disable http
set authentication login local enable console
set authentication login local enable telnet
set authentication login local enable http
set authentication enable local enable console
set authentication enable local enable telnet
set authentication enable local enable http
set authentication login kerberos disable console
set authentication login kerberos disable telnet
set authentication login kerberos disable http
set authentication enable kerberos disable console
set authentication enable kerberos disable telnet
set authentication enable kerberos disable http
set authentication login attempt 3 console
set authentication login attempt 3 telnet
set authentication login lockout 0 console
set authentication login lockout 0 telnet
set authentication enable attempt 3 console
set authentication enable attempt 3 telnet
set authentication enable lockout 0 console
set authentication enable lockout 0 telnet
!
#stp mode
set spantree mode pvst+
!
#vtp
set vtp domain hbu
set vtp mode server
set vtp v2 disable
set vtp pruning disable
set vtp pruneeligible 2-1000
clear vtp pruning 1001-1005
set vlan 1 name default type ethernet mtu 1500 said 100001 state active
set vlan 99 name wh type ethernet mtu 1500 said 100099 state active
set vlan 101 name xinzhongxin type ethernet mtu 1500 said 100101 state active
set vlan 102 name laozhongxin type ethernet mtu 1500 said 100102 state active
set vlan 103 name chukou type ethernet mtu 1500 said 100103 state active
set vlan 510 name 02x type ethernet mtu 1500 said 100510 state active
set vlan 511 name 02d type ethernet mtu 1500 said 100511 state active
set vlan 512 name 04x type ethernet mtu 1500 said 100512 state active
set vlan 513 name 06x type ethernet mtu 1500 said 100513 state active
set vlan 514 name 06d type ethernet mtu 1500 said 100514 state active
set vlan 515 name 09x type ethernet mtu 1500 said 100515 state active
set vlan 516 name 09d type ethernet mtu 1500 said 100516 state active
set vlan 517 name 12x type ethernet mtu 1500 said 100517 state active
set vlan 518 name 12d type ethernet mtu 1500 said 100518 state active
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state acti
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active s
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state act
set dot1q-all-tagged disable
!
#ip
set feature mdg enable
set feature psync-recovery no-powerdown
set interface sc0 1 10.186.240.100/255.0.0.0 10.255.255.255
set interface sc0 up
set interface sl0 0.0.0.0 0.0.0.0
set interface sl0 up
set arp agingtime 1200
set ip redirect enable
set ip unreachable enable
set ip fragmentation enable
set ip alias default 0.0.0.0
!
#command alias
!
#vmps
set vmps server retry 3
set vmps server reconfirminterval 60
set vmps downloadmethod tFTP
set vmps downloadserver 0.0.0.0 vmps-config-database.1
set vmps state disable
!
#rcp
set rcp username
!
#dns
set ip dns disable
!
#spantree
#uplinkfast groups
set spantree uplinkfast disable
#backbonefast
set spantree backbonefast disable
#portfast
set spantree portfast bpdu-guard disable
set spantree portfast bpdu-filter disable
#bpdu-skewing
set spantree bpdu-skewing disable
#vlan 1003
set spantree enable 1003
set spantree fwddelay 4 1003
set spantree hello 2 1003
set spantree maxage 10 1003
set spantree priority 32768 1003
#vlan 1005
set spantree enable 1005
set spantree fwddelay 4 1005
set spantree hello 2 1005
set spantree maxage 10 1005
set spantree priority 32768 1005
#vlan(defaults)
set spantree enable 1,99,101-103,510-518
set spantree fwddelay 15 1,99,101-103,510-518
set spantree hello 2 1,99,101-103,510-518
set spantree maxage 20 1,99,101-103,510-518
set spantree priority 32768 1,99,101-103,510-518
!
#syslog
set logging console enable
set logging telnet enable
set logging server disable
set logging level cdp 4 defa

网友评论
评论
发 布

更多软件教程
  • 软件教程推荐
更多+
Greenfoot设置中文的方法

Greenfoot设置中文的方法

Greenfoot是一款简单易用的Java开发环境,该软件界面清爽简约,既可以作为一个开发框使用,也能够作为集成开发环境使用,操作起来十分简单。这款软件支持多种语言,但是默认的语言是英文,因此将该软件下载到电脑上的时候,会发现软件的界面语言是英文版本的,这对于英语基础较差的朋友来说,使用这款软件就会...

07-05

Egret UI Editor修改快捷键的方法

Egret UI Editor修改快捷键的方法

Egret UI Editor是一款开源的2D游戏开发代码编辑软件,其主要功能是针对Egret项目中的Exml皮肤文件进行可视化编辑,功能十分强大。我们在使用这款软件的过程中,可以将一些常用操作设置快捷键,这样就可以简化编程,从而提高代码编辑的工作效率。但是这款软件在日常生活中使用得不多,并且专业性...

07-05

KittenCode新建项目的方法

KittenCode新建项目的方法

KittenCode是一款十分专业的编程软件,该软件给用户提供了可视化的操作界面,支持Python语言的编程开发以及第三方库管理,并且提供了很多实用的工具,功能十分强大。我们在使用这款软件进行编程开发的过程中,最基本、最常做的操作就是新建项目,因此我们很有必要掌握新建项目的方法。但是这款软件的专业性...

07-05

Thonny设置中文的方法

Thonny设置中文的方法

Thonny是一款十分专业的Python编辑软件,该软件界面清爽简单,给用户提供了丰富的编程工具,具备代码补全、语法错误显示等功能,非常的适合新手使用。该软件还支持多种语言,所以在下载这款软件的时候,有时候下载到电脑中的软件是英文版本的,这对于英语基础较差的小伙伴来说,使用这款软件就会变得十分困难,...

07-05

最新软件下载