米葫芦网

RFC1370 - Applicability Statement for OSPF

热度:2℃ 发布时间:2024-11-17 21:29:50

Network Working Group Internet Architecture Board
Request for Comments: 1370 Lyman Chapin, Chair
October 1992
Applicability Statement for OSPF
Status of this Memo
This memo is an IAB standards track Applicability Statement for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "IAB
Official Protocol Standards" for the standardization state and status
of this specification. Distribution of this memo is unlimited.
1. INTRODUCTION
Users and vendors have eXPressed a strong need for IP routers from
different vendors that can interoperate using a common Interior
Gateway Protocol (IGP). There is therefore an urgent requirement for
a high-functionality non-proprietary "open" IGP that will be
ubiquitously available from all IP router vendors.
The Open Shortest Path First (OSPF) routing protocol [1] was
developed by the IETF to fill this need. This Applicability
Statement specifies the circumstances under which OSPF must be
implemented by router vendors. The history of OSPF development and
the reasoning behind this Applicability Statement will be found in
[5].
This Applicability Statement places a requirement on vendors claiming
conformance to this standard, in order to assure that users will have
the option of deploying OSPF when they need a multivendor,
interoperable IGP in their environment. Users are of course free to
use whatever routing protocol best meets their requirements.
2. APPLICABILITY OF OSPF
An IP router that implements any routing protocol (other than static
routes) is required to implement OSPF [1] and the OSPF MIB [2].
Within OSPF, implementation of all features except TOS (Type-of-
Service) routing is required; implementation of TOS routing is
recommended.
This requirement does not prevent a router from implementing other
routing protocols in addition to OSPF. Complete and definitive
requirements on all ASPects of an IP router will be found in a
forthcoming Applicability Statement: "Requirements for IP Routers"
[4], currently in preparation in the IETF. "Requirements for IP
Routers", when it becomes a Standard, will take precedence if its
requirements for OSPF should conflict with this present RFC.
It should be noted that OSPF is intended for use by routers for
exchanging dynamic routing information, and not for use by hosts. As
discussed in Section 3.3.1.4 of STD-2, "Requirements for Internet
Hosts -- Communication Layers" [3], "wiretapping" of routing
protocols by hosts is not recommended. Recommended mechanisms for a
host to use for discovering local routers and detecting dead routers
will be found in [3]. In particular, the ICMP Router Discovery
messages, under development, will provide a standard way for a host
to learn the addresses of local routers [6].
3. REFERENCES
[1] Moy, J., "OSPF Version 2", RFC1247, Proteon, Inc., July 1991.
[2] Baker, F., and R. Coltun, "OSPF Version 2 Management Information
Base", RFC1253, ACC, Computer Science Center, August 1991.
[3] Braden, R., Editor, "Requirements for Internet Hosts --
Communication Layers", IETF, STD 3, RFC1122, October 1989.
[4] Almquist, P., Editor, "Requirements for IP Routers", Work in
Preparation, IETF.
[5] Gross, P., Editor, "Choosing a "Common IGP" for the IP Internet
(The IESG"s Recommendation to the IAB)", RFC1371, IESG, October
1992.
[6] Deering, S., Editor, "ICMP Router Discovery Messages", RFC1256,
Xerox PARC, September 1991.
Security Considerations
Security issues are not discussed in this memo.
Author"s Address
A. Lyman Chapin
BBN Communications Corporation
150 Cambridge Park Drive
Cambridge, MA 02140
Phone: 617-873-3133
Fax: 617-873-4086
Email: Lyman@BBN.COM

网友评论
评论
发 布

更多软件教程
  • 软件教程推荐
更多+
Greenfoot设置中文的方法

Greenfoot设置中文的方法

Greenfoot是一款简单易用的Java开发环境,该软件界面清爽简约,既可以作为一个开发框使用,也能够作为集成开发环境使用,操作起来十分简单。这款软件支持多种语言,但是默认的语言是英文,因此将该软件下载到电脑上的时候,会发现软件的界面语言是英文版本的,这对于英语基础较差的朋友来说,使用这款软件就会...

07-05

Egret UI Editor修改快捷键的方法

Egret UI Editor修改快捷键的方法

Egret UI Editor是一款开源的2D游戏开发代码编辑软件,其主要功能是针对Egret项目中的Exml皮肤文件进行可视化编辑,功能十分强大。我们在使用这款软件的过程中,可以将一些常用操作设置快捷键,这样就可以简化编程,从而提高代码编辑的工作效率。但是这款软件在日常生活中使用得不多,并且专业性...

07-05

KittenCode新建项目的方法

KittenCode新建项目的方法

KittenCode是一款十分专业的编程软件,该软件给用户提供了可视化的操作界面,支持Python语言的编程开发以及第三方库管理,并且提供了很多实用的工具,功能十分强大。我们在使用这款软件进行编程开发的过程中,最基本、最常做的操作就是新建项目,因此我们很有必要掌握新建项目的方法。但是这款软件的专业性...

07-05

Thonny设置中文的方法

Thonny设置中文的方法

Thonny是一款十分专业的Python编辑软件,该软件界面清爽简单,给用户提供了丰富的编程工具,具备代码补全、语法错误显示等功能,非常的适合新手使用。该软件还支持多种语言,所以在下载这款软件的时候,有时候下载到电脑中的软件是英文版本的,这对于英语基础较差的小伙伴来说,使用这款软件就会变得十分困难,...

07-05

最新软件下载