米葫芦网

RFC1886 - DNS Extensions to support IP version 6

热度:10℃ 发布时间:2024-11-18 03:37:06

Network Working Group S. Thomson
Request for Comments: 1886 Bellcore
Category: Standards Track C. Huitema
INRIA
December 1995
DNS Extensions to support IP version 6
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Abstract
This document defines the changes that need to be made to the Domain
Name System to support hosts running IP version 6 (IPv6). The
changes include a new resource record type to store an IPv6 address,
a new domain to support lookups based on an IPv6 address, and updated
definitions of existing query types that return Internet addresses as
part of additional section processing. The extensions are designed
to be compatible with existing applications and, in particular, DNS
implementations themselves.
1. INTRODUCTION
Current support for the storage of Internet addresses in the Domain
Name System (DNS)[1,2] cannot easily be extended to support IPv6
addresses[3] since applications assume that address queries return
32-bit IPv4 addresses only.
To support the storage of IPv6 addresses we define the following
extensions:
o A new resource record type is defined to map a domain name to an
IPv6 address.
o A new domain is defined to support lookups based on address.
o Existing queries that perform additional section processing to
locate IPv4 addresses are redefined to perform additional
section processing on both IPv4 and IPv6 addresses.
The changes are designed to be compatible with existing software. The
existing support for IPv4 addresses is retained. Transition issues
related to the co-existence of both IPv4 and IPv6 addresses in DNS
are discussed in [4].
2. NEW RESOURCE RECORD DEFINITION AND DOMAIN
A new record type is defined to store a host"s IPv6 address. A host
that has more than one IPv6 address must have more than one such
record.
2.1 AAAA record type
The AAAA resource record type is a new record specific to the
Internet class that stores a single IPv6 address.
The value of the type is 28 (decimal).
2.2 AAAA data format
A 128 bit IPv6 address is encoded in the data portion of an AAAA
resource record in network byte order (high-order byte first).
2.3 AAAA query
An AAAA query for a specified domain name in the Internet class
returns all associated AAAA resource records in the answer section of
a response.
A type AAAA query does not perform additional section processing.
2.4 Textual format of AAAA records
The textual representation of the data portion of the AAAA resource
record used in a master database file is the textual representation
of a IPv6 address as defined in [3].
2.5 IP6.INT Domain
A special domain is defined to look up a record given an address. The
intent of this domain is to provide a way of mapping an IPv6 address
to a host name, although it may be used for other purposes as well.
The domain is rooted at IP6.INT.
An IPv6 address is represented as a name in the IP6.INT domain by a
sequence of nibbles separated by dots with the suffix ".IP6.INT". The
sequence of nibbles is encoded in reverse order, i.e. the low-order
nibble is encoded first, followed by the next low-order nibble and so
on. Each nibble is represented by a hexadecimal digit. For example,
the inverse lookup domain name corresponding to the address
4321:0:1:2:3:4:567:89ab
would be
b.a.9.8.7.6.5.0.4.0.0.0.3.0.0.0.2.0.0.0.1.0.0.0.0.0.0.0.1.2.3.4.IP6.INT.
3. MODIFICATIONS TO EXISTING QUERY TYPES
All existing query types that perform type A additional section
processing, i.e. name server (NS), mail exchange (MX) and mailbox
(MB) query types, must be redefined to perform both type A and type
AAAA additional section processing. These new definitions mean that a
name server must add any relevant IPv4 addresses and any relevant
IPv6 addresses available locally to the additional section of a
response when processing any one of the above queries.
4. SECURITY CONSIDERATIONS
Security issues are not discussed in this memo.
5. REFERENCES
[1] Mockapetris, P., "Domain Names - Concepts and Facilities", STD
13, RFC1034, USC/Information Sciences Institute, November 1987.
[2] Mockapetris, P., "Domain Names - Implementation and Specifica-
tion", STD 13, RFC1035, USC/Information Sciences Institute,
November 1987.
[3] Hinden, R., and S. Deering, Editors, "IP Version 6 Addressing
Architecture", RFC1884, Ipsilon Networks, Xerox PARC, December
1995.
[4] Gilligan, R., and E. Nordmark, "Transition Mechanisms for IPv6
Hosts and Routers", Work in Progress.
Authors" Addresses
Susan Thomson
Bellcore
MRE 2P343
445 South Street
Morristown, NJ 07960
U.S.A.
Phone: +1 201-829-4514
EMail: set@thumper.bellcore.com
Christian Huitema
INRIA, Sophia-Antipolis
2004 Route des Lucioles
BP 109
F-06561 Valbonne Cedex
France
Phone: +33 93 65 77 15

网友评论
评论
发 布

更多软件教程
  • 软件教程推荐
更多+
Greenfoot设置中文的方法

Greenfoot设置中文的方法

Greenfoot是一款简单易用的Java开发环境,该软件界面清爽简约,既可以作为一个开发框使用,也能够作为集成开发环境使用,操作起来十分简单。这款软件支持多种语言,但是默认的语言是英文,因此将该软件下载到电脑上的时候,会发现软件的界面语言是英文版本的,这对于英语基础较差的朋友来说,使用这款软件就会...

07-05

Egret UI Editor修改快捷键的方法

Egret UI Editor修改快捷键的方法

Egret UI Editor是一款开源的2D游戏开发代码编辑软件,其主要功能是针对Egret项目中的Exml皮肤文件进行可视化编辑,功能十分强大。我们在使用这款软件的过程中,可以将一些常用操作设置快捷键,这样就可以简化编程,从而提高代码编辑的工作效率。但是这款软件在日常生活中使用得不多,并且专业性...

07-05

KittenCode新建项目的方法

KittenCode新建项目的方法

KittenCode是一款十分专业的编程软件,该软件给用户提供了可视化的操作界面,支持Python语言的编程开发以及第三方库管理,并且提供了很多实用的工具,功能十分强大。我们在使用这款软件进行编程开发的过程中,最基本、最常做的操作就是新建项目,因此我们很有必要掌握新建项目的方法。但是这款软件的专业性...

07-05

Thonny设置中文的方法

Thonny设置中文的方法

Thonny是一款十分专业的Python编辑软件,该软件界面清爽简单,给用户提供了丰富的编程工具,具备代码补全、语法错误显示等功能,非常的适合新手使用。该软件还支持多种语言,所以在下载这款软件的时候,有时候下载到电脑中的软件是英文版本的,这对于英语基础较差的小伙伴来说,使用这款软件就会变得十分困难,...

07-05

最新软件下载